Print this PagePrintable PageEmail this PageEmail this Page

Metric Compressed Gas Correction Calculator

If the gas pressure or temperature varies from the values marked
on the meter dial, then a correction factor must be applied to obtain
the actual flow rate.

Enter the values below:

                                                                                      
Pa:Actual gas pressure at entrance to meter, bar.
Pc:Calibrated gas pressure marked on the meter dial, bar.
Tc:Calibrated gas temperature marked on meter dial, Celsius.
Ta:Actual gas temperature at meter, Celsius.
Mr:Reading on display of meter.
K:    Actual corrected flow rate.